Brass Flat Metal Backs

0.00 TL

OEKOTEX certification compatibility
Corrosion resistance
Different design capability

PDF DOWNLOAD

Other products in this category

Brass Sew On Shank Button

0.00 TL

Description
Dimensions

Brass flat metal backs are resistant to corrosion and suitable for use with thin fabrics. It is lighter than alloyed products. Assembly of polyester, wood, acrylic stones and so on can be applied on top of the upper part.

Application;
Applied on fabric by sewing

Measure ;
You can see the dimensions of brass rings produced in different sizes from the “dimensions“ tab on our the page.

Logo;
Logo cannot be made.

Feature;
For the desired colors, you can look at the coating chart and select.

Dimensions - D (Outter Diameter) x H (Height)
5 mm Flat Metal Back - 4,81 mm x 3,70 mm	✔
6 mm Flat Metal Back - 5,52 mm x 3,64 mm	✔
8 mm Thin Legged Flat Metal Back - 8 mm x 5 mm	✔
8 mm Flat Metal Back - 8,50 mm x 5,15 mm	✔
10 mm Flat Metal Back - 9,70 mm x 5,50 mm	✔
11 mm Flat Metal Back - 11 mm x 5,70 mm	✔
13 mm Flat Metal Back - 13 mm x 5,80 mm	✔
15 mm Flat Metal Back - 15,62 mm x 5,80 mm	✔
16 mm Flat Metal Back - 16 mm x 5,94 mm	✔
18 mm Flat Metal Back - 18 mm x 6,15 mm	✔
23 mm Flat Metal Back - 23 mm x 6,90 mm	✔
25 mm Flat Metal Back - 25,50 mm x 6 mm	✔
28 mm Flat Metal Back - 28 mm x 7 mm	✔
29 mm Flat Metal Back - 29 mm x 6 mm	✔
32 mm Flat Metal Back - 32 mm x 7,30 mm	✔
35 mm Flat Metal Back - 35 mm x 6,30 mm	✔
9 mm Deep Metal Back - 9 mm x 5,30 mm	✔
10 mm Deep Metal Back - 9,70 mm x 5,57 mm	✔
12 mm Deep Metal Back - 12 mm x 6 mm	✔
14 mm Deep Metal Back - 14,60 mm x 7 mm	✔
18 mm Deep Metal Back - 18,64 mm x 7,74 mm	✔
20 mm Deep Metal Back - 20 mm x 8 mm	✔
25 mm Deep Metal Back - 25,50 mm x 8,52 mm	✔